Publications:

PUBLICATIONS (Refereed Journal and Conference Proceedings)

Lin, P. P. and Zhu, J. H., "The Coupling Relationship among Process Faults, Actuator Faults and Sensor Faults for a Typical MIMO Dynamic System," International Journal of Computer, Consumer and Control, V4, N2, 2015

Lin, P. P, and Zhu, J. H.,"Detection and Isolation of Process Faults from Actuator Faults and Sensor Faults for a Typical MIMO Dynamic System," Proceedings of IEEE International Conference in Control and Automation (ICCA), June, 2014

Lin,P. P., Ye, M., and K. M. Lee, "Vehicle Anti-Skid Control by Means of Extended State Observer and Active Disturbance Rejection Controller," V2, N1, pp. 26-34, International Journal of Computer, Consumer and Control, 2013

Lin, P. P., Ye, D., Gao, Z., and Zheng, Q., "Intelligent Process Facult Diagnosis for Nonlinear Systems with Uncertain Plant Model via Extended State Observer and Soft Computing," V3, N4, pp. 346-355, Intelligent Control and Automation, 2012

Lin, P. P., "Validation and Verification for Real-Time Acceleration Estimation of a Vibrating Source in Frequency Domain", ASME 2012 Verification and Validation Symposium, May 2-4, 2012

Wu, C., Lin, P. P., Han, Z. and Li, S., "Simulation-Based Optimal Design of Alpha-Beta-Gamma-Delta Filter," V7, I2, pp. 247-253, International Journal of Automation and Computing, May 2010

Lin, P. P., Ye, M. and Lee, K.,"Intelligent Observer-Based Road Surface Condition Detection and Identification," Proceedings of IEEE Conference on Systems, Man and Cybernetics (SMC), 2008

Ye, D., Lin, P. P. and Gao, Z.,"Fault Detection with Little Knowledge of the System," Proceedings of IEEE Conference on Systems, Man and Cybernetics (SMC), 2008

Ye, D., Lin, P.P. and Gao, Z., "Research on Fault Diagnosis Using Extended State Observer," Chinese Journal of Scientific Instrument, V29, I4, April, 2008

Ye, D., Lin, P. P. and Gao, Z., "Fault Detection and Isolation for Nonlinear Dynamic Systems Using ESO," under review of ASME Journal of Dynamic Systems, Measurement and Control, December, 2007

Lin, P. P. and Singh, H., "Intelligent Model-Free Diagnosis for Multiple Faults in a Nonlinear Dynamic System," Proceedings of IEEE/ASME Conference on Intelligent Mechatronics, Zurich, Switzerland, September, 2007

Lin, P. P., Guo, Q. and Li, X., "Online Inspection for Glass Fiber Forming," Transactions of the ASME, Journal of Manufacturing Science and Engineering, V129, pp. 164-171, February 2007

Jules, K. and Lin, P. P., "Real Time On-line Space Research Laboratory Environment Monitoring with Off-line Trend and Prediction Analysis," Acta Astronautica, V61, pp. 27-36, 2007

Lin, P. P. and Jules, K., "Fast Multidisciplinary Design Optimization via Taguchi Methods and Soft Computing," AIAA Journal of Aerospace Computing, Information and Communication, V3, pp. 309-319, June 2006

Lin, P. P. and X. Li, "Fault Diagnosis, Prognosis and Self-Reconfiguration for Nonlinear Dynamic Systems Using Soft Computing Techniques," Proceedings of the 2006 IEEE Systems, Man and Cybernetics, October 8-10, 2006

Jules, K., and Lin, P. P., "Real Time On-line Space Research Laboratory Environment Monitoring with off-line trend and Prediction Analysis," Proceedings of 57th International Astronautical Federation Congress, IAC-06-A2.5.03, Valencia, Spain, October 2-6, 2006

Lin, P. P. and Guo, Q., "Automated On-Line Inspection for Glass Fiber Forming," Proceedings of the 2005 IEEE International Conference on Information Acquisition, June 27- July 3, 2005

Lin, P. P., and Jules, K., "Soft Computing for Fast Multidisciplinary Design Optimization," Proceedings of 2003 IEEE Intelligent Automation Conference, Hong Kong, pp. 703-708, 2003

Jules, K., and Lin, P. P., "Monitoring the Microgravity Environment Quality On-board the International Space station Using Soft Computing Techniques, Part I: System Design," Microgravity and Space Station Utilization, V3, N1, March 2003

Lin, P. P., and Eappen, R., "Development of a Dynamic Web-Based Graphing Tool," Proceedings of the International Conference on Manufacturing Automation: Rapid Response Solutions to Product Development, pp. 535-542, December 2002

Lin, P. P., and Jules, K., "An Intelligent System for Monitoring the Microgravity Quality On-Board the International Space Station," IEEE Transactions on Instrumentation and Measurement, V51, N1, pp. 1002-1009, October 2002

Jules, K., Lin, P. P., "Artificial Neural Networks Applications; From Aircraft Design optimization to Orbiting Spacecraft On-board Environment Monitoring," NIMA-Sc2001-2001 NATO Advanced Study Institute on Neural Networks for Instrumentation, Measurement and Related Industrial Applications: Case study Cases, Crema, Italy, 2001

Lin, P. P., and Jules, K., "An Intelligent System for Monitoring the Microgravity Quality On-Board the International Space Station," IEEE Instrumentation and Measurement Technology Conference (IMTC 2001), Paper No. IM-3280, 2001

Jules, K., Lin, P. P., and Weiss, D. S., "Monitoring the Microgravity Environment Quality On-board the International Space Station using soft Computing Techniques, Part II: System Design," IAF-01-J.5.01, 52nd International Astronautical Congress, Toulouse, France, 2001

Jules, K., Lin, P. P., and Weiss, D. S., "Monitoring the Microgravity Environment Quality On-board the International Space Station using soft Computing Techniques, Part I: System Design," IAF-00-J.5.07, 51th International Astronautical Congress, Rio de Janeiro, Brazil, 2000

Jules, K., and Lin, P. P., "Multidisciplinary System Design Optimization Using Taguchi Techniques, Fuzzy Logic and  Neural Networks," AIAA Paper No. 2000-0688, 38th Aerospace Science Meeting & Exhibit, Reno, NV, 2000

Lin, P. P., and Jules, K., "A Simulation-Based Generic Tool for Multidisciplinary Design Optimization," AIAA 2000-4783, 8th AIAA/NASA/USAF/ISSMO Symposium on Multidisciplinary Analysis and Optimization, 2000

Chang, M., and Lin, P. P., "On-line Free Form Surface Measurement via a Fuzzy-logic Controlled Scanning Probe," International Journal of Machine and Manufacture, V39, pp. 537-552, 1999

Lin, P. P., and Kuo, C. T.,  "A 3-D Surface Geometry Measurement Technique Using Fringe Projection," Lasers in Engineering, V8, pp. 159-174, 1999

Lin, P. P. and Jules, K.,"Optimized Multidisciplinary System Design for Aircraft and Propulsion Systems," 34th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, Cleveland, OH, 1998

Lin, P. P., and Jules K.,"Development of an Optimized Multidisciplinary System Design Tool Using Taguchi Techniques and Neural Networks: Part II," Proceedings of Artificial Neural Networks in Engineering (ANNIE¿98) Conference, Intelligent Engineering Systems through Artificial Neural Networks, V8, ASME Press, pp. 861-866, 1998

Lin, P. P., Chawla, M. D., and Wagner, P. M, "Three-Dimensional Deformation Comparison between F-16 Bias and Radial Aircraft Tires," Tire Science and Technology, V25, N1, pp. 63-75, 1997

Lin, P. P., and Jules, K., "Development of an Optimized Multidisciplinary System Design Tool Using Taguchi Techniques and Neural Networks," Proceedings of Artificial Neural Networks in Engineering (ANNIE¿97) Conference, Intelligent Engineering Systems through Artificial Neural Networks, V7, ASME Press, pp. 925-930, 1997

Lin, P. P., C. T. Kuo, and Chawla, M. D., ¿Deformation Data Analysis for Dynamic Testing of F-16 Bias and radial Tires,¿ Proceeding of 1st Int¿l Symposium on Deformation and Fracture of Elastomer Composites, Paper No. 48, sponsored by American Chemistry Society, Rubber Division, 1997

Chang, M., and Lin, P. P., "Noncontact Sphericity Measurement by Means of Phase Shift Interferometry," Transactions of the ASME, Journal of Manufacturing Science and Engineering, Vol. 118, pp. 394-399, 1996

Lin, P. P., Chawla, M.D., and Wagner, P. M., "Dynamic Testing of F-16 Bias and Radial Aircraft Tire Deformation," SAE Technical Paper No. 961303, Aerospace Atlantic Conference & Exposition, 1996

Lin, P. P., Chawla, M.D., and Wagner, P.M., "Deformation Comparison between Bias and Radial Aircraft Tires Using Optical Techniques," SAE Technical Paper No. 951433, SAE Aerospace Atlantic Conference & Exposition, 1995

Lin, P. P., and Kuo, C. T., "An Efficient Optical Technique for Three-dimensional geometry Determination," ASME conference Proceedings in Manufacturing science and Engineering, MED-Vol. 2-1/MH-vol. 3-1, pp. 507-518, 1995

Graham, R. E., and Lin, P. P., "Neural Network for Positioning Space Station Solar Arrays," Symposium on Automatic Control in Aerospace, sponsored by the International Federation of Automatic Control, Palo Alto, CA., September 12-16, 1994

Chang, M., Lin, P. P., and Tai, W. C., "Subpixel Resolution Based Fringe Center Detection Technique and its Applications Using Sinusoidal Gratings," Optics and Lasers in Engineering, V 20, N3, 1994
  
Lin, P. P., Chawla, M. D., and Ulrich, P. C., "Optical Technique for Measuring Tire Deformation and Strains - Preliminary Results," SAE Technical Paper No. 941178, SAE Aerospace Atlantic Conference & Exposition, 1994.

Lin, P. P., Chawla, M. d., and Ulrich, P. C., "Optical Measurement for Tire Deformation and Strain," Aerospace Engineering Magazine, pp. 11-12, July 1994

Liou, Y. H., Lin, P. P., Lindeke, R. R., and Chiang, H. D., "Tolerance Specification of Robot Kinematic Parameters using an Experimental Design Techniques - The Taguchi Method," Robotics and Computer-Integrated Manufacturing, V10, N3, pp. 199-207, 1993

Yang, A. J., and Lin, P. P., "Improving the Convergence and Adaptability of Kohonen Self-Organizing Neural Network," Proceedings of Artificial Neural Networks in Engineering (ANNIE¿93) Conference, Intelligent Engineering Systems Through Artificial Neural Networks, V3, ASME Press, pp. 213-218, 1993

Armand, S. C., and Lin, P, P., "Influence of Mass Moment of Inertia on Normal Modes of a Preloaded Solar Array Mast", Finite Elements in Analysis and Design,, V14, pp. 313-324, 1993

Lin, P. P., and Yang, A. J.,"An Efficient Technique for Finding the Desired Global Optimum of Robotic Joint Displacement," Journal of Robotic Systems, V9, N8, pp. 1043-1058, 1992

Liou, Y. H., Lin, P. P., Lindeke, R., and Chiang, H. D., "Design Methodology for Robot Kinematic Parameter Tolerances Using the Taguchi Method", Proceedings of Japan-U.S.A. Symposium on Flexible Automation, Sponsored by ASME, V2, pp. 1047-1052, 1992

Armand, S. C., and Lin, P, P., "Influence of Mass Moment of Inertia on Normal Modes of Preloaded Solar Array Mast", Proceedings of MSC World Users' Conference, V1, pp. 12-1 - 12-14, 1992

Lin, P. P., Chiang, H. D. and Cui, X. X. "An Improved Method for On-line Calculation and Compensation of the Static Deflection at a Robot End-Effecter", Journal of Robotic Systems, V8, N2, pp. 267-288, 1991

Lin, P. P., Parvin, F., and Schoenig, Jr., F. C., "Optical Gaging of Very Short-Term Surface Waviness," Transactions of the North American Manufacturing of Research Institution of SME, pp. 327-332, 1991

Lin, P. P., and Yang, A. J., "Data Communication between an Expert System Shell and a Conventional Algorithmic Program with Application to Cam Motion Specification", Engineering with Computers, V6, N2, pp. 113-119, 1990

Gorla, R.S.R., Lin, P. P., and Yang, A. J., "Asymptotic Boundary Layer Solutions for Mixed Convection from a Vertical Surface in a Micropolar Fluid", International Journal of Engineering Science, V28, N6, pp. 525-533, 1990

Lin, P. P. and Mikel, R. J. "A Robotic Sensor Design Project for Interdisciplinary Engineering Education", International Journal of Applied Engineering Education, V.6, N.6, pp.655-663, 1990

Lin, P. P. and Yang, A. J., "Data Communication between An Expert System Shell and A Conventional Algorithmic Program with Application to Cam Motion Specification", Proceedings of the 1989 ASME Computers in Engineering Conference, pp. 469-474, 1989

Lin, P. P. and Datseris, P. P., "Inverse Problem Solutions via Plate Theory with Application to Position and Force Sensing", Transactions of the ASME , Journal of Applied Mechanics, V 55, N 2, June, pp. 489 - 491, 1988

Lin, P. P. and Mikel, R. J., "Low cost Gripper-Based Position/Force Sensor Design and Fabrication", Proceedings of the IASTED International Symposium on Robotics and Automation, Santa Barbara, California, May 25-27, pp. 1-6, 1988

Lin, P. P., "Differential Relationships with Applications to Robot Inverse Joint Solution and Motion Correction", Robotics and Factories of the Future'87, Proceedings of the Second International Conference, pp. 293-300, 1987

Lin, P. P. and Datseris, P., "Development of a Position and Force Sensor for Robotic Applications", Proceedings of the IEEE International Conference on Robotics and Automation, pp. 1798-1805, 1986

Lin, P. P. and Datseris, P. P., "Inverse Problem Solutions in Elasticity with Applications to Position and Force Sensor Design", presented in the Tenth U. S. National Congress of Applied Mechanics, Austin, Texas, June, 1986